Your billB-05
The stormwater fee on a SAWS bill is the city's
Filed Nov. 11, 2026 · checked against 3 sources · Aquifer to Tap
The stormwater fee on a SAWS bill is a City of San Antonio charge, $3.75, $4.94 or $10.45 a month for homes depending on impervious area, which SAWS collects as the city's billing agent.
$3.75monthly residential Tier 1 fee, 2,750 sq ft or less of impervious areaSource: City of San Antonio Public Works

It is collected monthly through SAWS bills, where it appears as "Stormwater Fee", according to City Public Works. City Council sets it under Chapter 552 of the Texas Local Government Code. The residential rates were revised in fiscal 2020, and SAWS says those rates took effect Oct. 1, 2019 and remain in effect.
Which tier is my house in?
The tier depends on the impervious area the City has on file for the lot, meaning surfaces rain cannot soak into. Gallons used play no part, so a month of heavy watering leaves this line unchanged.
| Tier | Impervious area | Monthly fee |
|---|---|---|
| Tier 1 (R1) | 2,750 sq ft or less | $3.75 |
| Tier 2 (R2) | More than 2,750 to 4,220 sq ft | $4.94 |
| Tier 3 (R3) | More than 4,220 sq ft | $10.45 |
The jump from Tier 2 to Tier 3 is the steep one: $5.51 a month, or $66.12 a year. SAWS's rate calculator lists the same three bands plus a "No Charge" option, for accounts that carry no stormwater line.
The City adopted the impervious-cover method on Sept. 10, 2015, by Ordinance 2015-09-10-0761, and the three residential tiers above are the ones it publishes.
Why does SAWS collect a city fee?
Public Works puts it plainly: "SAWS serves as the City's billing agent." The rate is a City Council decision, so it sits outside SAWS's own rate tables. The approved 2027 SAWS tables in the 2027 report cover water and sewer, and the stormwater fee is not among them.
Questions about the impervious-area figure go to the City, not SAWS. Owners can appeal the measured area through the City's impervious cover process, which Public Works links from its fee page.
Outside San Antonio
SAWS also bills stormwater for Balcones Heights, Castle Hills, Converse, Leon Valley and Live Oak. Residents of those cities should ask their own city about rates and tiers, as SAWS's stormwater page advises.
The fee is small next to water and sewer, but it is fixed, so it weighs more on a low-use bill. The other fixed lines are listed in how a SAWS bill is built, and the sample totals in the worked bills assume Tier 1. San Antonio's flood and rain record is covered under Storms.
Key facts
- The stormwater fee is a City of San Antonio fee; SAWS is the billing agent
- Residential tiers: $3.75 (up to 2,750 sq ft), $4.94 (to 4,220 sq ft), $10.45 (above 4,220 sq ft)
- Rates revised in fiscal 2020; SAWS says they took effect Oct. 1, 2019
- Based on impervious area, not water use
- Appeals of the measured area go through the City
Sources
- City of San Antonio Public Works — Storm Water Utility Fee (checked Nov. 11, 2026)
- SAWS — residential rate calculator (checked Nov. 11, 2026)
- SAWS — interactive bill explainer, stormwater line (checked Nov. 11, 2026)