Your billB-11
Reading your ConnectH2O meter
Filed Nov. 11, 2026 · checked against 5 sources · Aquifer to Tap
A SAWS ConnectH2O meter shows seven screens, stepped through with an optical button, and counts use in full 100-gallon units, so a reading of 2,814.4 gallons bills as 2,800.
7screens on the ConnectH2O meter displaySource: SAWS

ConnectH2O meters collect hourly readings and send them to SAWS over a secure wireless network, per the ConnectH2O page. That data feeds billing, leak and high-use alerts by text or email, and the usage view in My Account. There is no extra fee or deposit for the meter.
Where is the meter?
SAWS says the meter sits underground under a round or oval lid, most often in a line from the front hose bib toward the street. On corner lots it may be at the side of the house, and in parts of the city it is in the alley. Lifting a small inner cover shows the digital display.
What do the seven screens show?
Tapping the optical button steps through the display in this order, according to SAWS's meter leak guide.
| Order | Screen |
|---|---|
| 1 | Errors and alerts |
| 2 | Current total volume |
| 3 | Flow rate (gallons per minute) |
| 4 | Water temperature |
| 5 | Software version |
| 6 | High-resolution reading |
| 7 | Display test |
Two of the seven do most of the work for a homeowner: current total volume, the figure the bill is built from, and flow rate, which shows whether water is moving at that moment.
How does billing count gallons?
The meter shows every gallon, but SAWS bills only full 100-gallon units, per its meter reading guide. A reading of 2,814.4 gallons bills as 28 units, or 2,800 gallons, and the leftover 14.4 gallons carries to the next bill. Rates are still priced per 1,000 gallons, which is why one SAWS page says customers are "billed per thousand gallons"; the two statements describe the counting unit and the pricing unit. This year's per-1,000-gallon prices are listed separately, and the bill's meter-reading section sits alongside the other lines in the line-by-line bill guide.
Using the screens to find a leak
With all water turned off inside and out, the flow-rate screen should read zero. SAWS says any other number means "leaks exist on your property and need to be located." A second test: write down the current total volume, leave all water off for an hour, then read it again; a higher number means a leak. SAWS also suggests checking that a water softener is working properly. More leak checks are on the Pipes beat.
SAWS maintains the pipe from the main to the meter, and the owner is responsible from the meter toward the house. After the repair, the receipt can support a request for a bill credit. SAWS offers a $150 rebate for an approved Wi-Fi flow sensor installed by a plumber, and it says it does not rebate one sensor brand because that brand is not compatible with the new meters.
The SAWS Board approved citywide deployment in December 2021, after a 2021 pilot at more than 2,500 sites. SAWS does not say how far the rollout has reached.
Key facts
- Seven screens, stepped through with an optical button
- Billing counts full 100-gallon units; prices are per 1,000 gallons
- Hourly readings drive leak and high-use alerts and My Account
- Flow rate above zero with all water off means a leak, per SAWS
- Citywide deployment approved in December 2021; no meter fee or deposit
Sources
- SAWS — ConnectH2O program (checked Nov. 11, 2026)
- SAWS — the seven meter screens and leak checks (checked Nov. 11, 2026)
- SAWS — How to Read an Electronic Water Meter (checked Nov. 11, 2026)
- SAWS rebates — plumber-installed flow sensors (checked Nov. 11, 2026)
- SAWS rebates — new customer shutoff valve (checked Nov. 11, 2026)