Skip to the reports
Aquifer to TapSan Antonio house water, filed in short reports
Beats

Your waterW-07

TTHM and HAA5 in the 2026 SAWS report

Filed Nov. 11, 2026 · checked against 3 sources · Aquifer to Tap

TTHM in SAWS water reached a highest locational average of 86.2 ppb in 2025 against an MCL of 80, and the 2026 Water Quality Report marks that line "No" for violation.

86.2 ppbhighest 2025 TTHM locational average, SAWS main systemSource: SAWS 2026 Water Quality Report

Haloacetic acids (HAA5), the other regulated byproduct group, came in at 30.6 ppb against an MCL of 60, also marked "No." Both are listed in the 2026 report under disinfection byproducts monitored in the distribution system, with "By-product of drinking water disinfection" as the likely source.

What does "highest locational average" mean?

The report's footnote says the figure "is the highest average of all HAA5 and TTHM sample results collected at a location over a year." In other words, 86.2 is not a single sample; it is an annual average at whichever sampling location ran highest. Individual results ranged from 0 to 86.2 ppb.

The report does not explain how that average relates to the 80 ppb limit or why the line is marked "No." This page does not fill that gap with its own reading of the federal rule. SAWS's statement for the year is that the main system "received no violations in 2025."

Disinfection byproducts, SAWS main system, 2026 report (2025 data)
ByproductHighest figure reportedRange of samplesMCLViolation
Total trihalomethanes (TTHM)86.2 ppb0-86.2 ppb80 ppbNo
Haloacetic acids (HAA5)30.6 ppb0-30.6 ppb60 ppbNo
Dibromochloromethane (plant)9.9 ppbunder 1.0-9.9 ppbnone listedNo

Where byproducts come from

EPA explains that disinfectants can react with naturally occurring material in water to form byproducts, including trihalomethanes and haloacetic acids. Its Stage 2 rule tightened compliance monitoring for TTHM and HAA5, and the agency says byproducts, "if consumed in excess of EPA's standard over many years, may increase health risks." The trade-off is the reason disinfection exists at all: untreated source water can carry pathogens such as Giardia and Cryptosporidium, EPA notes.

SAWS disinfects with free chlorine, not chloramine, as set out in SAWS uses free chlorine. EPA's chloramine page says some utilities switched to chloramine to meet byproduct limits; SAWS's sources show no such switch.

What a household can read from this

The 2025 figures are system-level. The report does not name the sampling location with the 86.2 average or give results by neighborhood, so no address can be matched to it from this document. Readers who want the whole table, from lead to radium, can start with the 2026 report summary; the aquifers and lake behind the supply are listed in the 2025 source breakdown.

Next to watch The next yearly report, with 2026 data, and the TTHM line in it.

Key facts

  • TTHM 2025: 86.2 ppb highest locational average, MCL 80, marked "No"
  • HAA5 2025: 30.6 ppb, MCL 60, marked "No"
  • Figure is a yearly average at one location, per the report footnote
  • SAWS main system: no violations in 2025
  • EPA: byproducts form when disinfectants react with natural material

Sources

  1. SAWS — 2026 Water Quality Report, disinfection byproducts table and footnote (checked Nov. 11, 2026)
  2. EPA — Stage 1 and Stage 2 Disinfectants and Disinfection Byproducts Rules (checked Nov. 11, 2026)
  3. EPA — page on chloramine use and byproduct limits (checked Nov. 11, 2026)