Your waterW-06
Lead service lines and Project Lead
Filed Nov. 11, 2026 · checked against 6 sources · Aquifer to Tap
Lead service lines are the target of SAWS's Project Lead, which offers a free service line inspection to homes built before 1989 whose line status is "unknown" and that have had no inspection.
1989lead service line materials banned, per SAWS; homes built earlier qualifySource: SAWS 2026 Water Quality Report

The pipe between the SAWS meter and the house is the customer's. SAWS's lead page says the customer-owned service line "is the property of the homeowner and not part of the public water piping system maintained by SAWS." That page carries an address lookup map showing what SAWS has on file for each property. The split between utility and owner is drawn out in who owns which pipe.
How does SAWS check a line?
When SAWS launched inventory outreach on Oct. 8, 2024, it said there were more than 600,000 customer service lines in San Antonio, more than half of unidentified material. Letters to customers with unknown, lead or galvanized lines started Oct. 16, 2024. An inspection may mean potholing a small hole in the yard, a look inside the meter box, or checking pipe where it enters the house. Customers or a licensed plumber can do that check and submit documentation, SAWS said. Current counts by material were not posted as text on Nov. 11, 2026.
SAWS also said it has removed the lead service lines it found on the utility side since the 1980s. Its compliance history page says Lead and Copper Rule sampling began in 1991 and that over 99% of samples have been below regulatory limits.
| Measure | Value |
|---|---|
| 90th percentile lead | 1.6 ppb |
| Action level | 15 ppb |
| Sites over action level | 0 |
| Violation | No |
| Likely source listed | corrosion of household plumbing |
What changes under EPA's 2024 rule
EPA's Lead and Copper Rule Improvements, final in October 2024, require most water systems to replace lead service lines within 10 years and lower the lead action level from 15 to 10 micrograms per liter. The compliance start date is not stated here because it was not confirmed from EPA's page. SAWS's own history page still describes the rule as pending, so it has not caught up.
EPA's basic lead page sets the health goal for lead at zero and says lead service lines, where present, are typically the most significant source of lead in tap water. It also says skin does not absorb lead from water, so bathing and showering should be safe.
Until a line is identified
The 2026 Water Quality Report says that when water has sat for several hours, flushing the tap for 30 seconds to two minutes before drinking or cooking reduces possible lead exposure. The full set of tap results is in the 2026 report summary.
Key facts
- Project Lead: free inspection for pre-1989 homes with "unknown" line status
- Customer-side line, meter to house, belongs to the homeowner
- 600,000-plus service lines, over half unidentified (SAWS, Oct. 2024)
- 2024 tap sampling: lead 90th percentile 1.6 ppb, 0 sites over 15 ppb
- EPA 2024 rule: most systems replace lead lines within 10 years; action level to 10 µg/L
Sources
- SAWS — Lead and service line lookup (checked Nov. 11, 2026)
- SAWS news release on lead line inventory outreach (Oct. 8, 2024) (checked Nov. 11, 2026)
- SAWS — History of Lead and Copper Compliance (checked Nov. 11, 2026)
- SAWS — 2026 report, lead service line inventory section (checked Nov. 11, 2026)
- EPA — Lead and Copper Rule Improvements (checked Nov. 11, 2026)
- EPA — Basic Information about Lead in Drinking Water (checked Nov. 11, 2026)