Your waterW-09
Do you need a water softener in San Antonio?
Filed Nov. 11, 2026 · checked against 4 sources · Aquifer to Tap
A water softener is not a health need in San Antonio: SAWS says its 15-20 grain hardness is "not a health hazard," and no SAWS page found recommends a softener.
15-20 gpgtypical SAWS hardness, which SAWS calls not a health hazardSource: SAWS Water Quality FAQs

SAWS's water quality FAQ describes hardness as naturally occurring calcium carbonate from the Edwards and Trinity aquifers. It also cites the National Research Council's view that hard drinking water supplies a little dietary calcium and magnesium. The 2026 Water Quality Report goes further in general terms, saying point-of-use devices may bring no health benefit when tap water meets federal standards.
Why do people install one anyway?
The reasons are comfort and upkeep. Hard water leaves scale in water heaters, film on glass and crust on aerators, and SAWS's own troubleshooting table suggests a heater flush two or three times yearly for the loose mineral. Some owners would rather soften the water than keep up with that. What that buildup looks like is pictured in the scale report.
That is a household decision. It is worth knowing the actual number at the tap first; SAWS publishes a range, and a home test gives a single reading, as explained in the SAWS hardness report.
What the City requires
Installing a softener inside San Antonio city limits takes a plumbing permit. The City's Home Remodeling FAQ lists softeners with water heaters, toilets and sewer lines as installs that need one, and offers a Limited Service Repair permit for emergency softener repairs, filed within 3 days. That FAQ dates from 2019, so its fee figures are not repeated here.
The City lets a homeowner pull a plumbing permit only for an existing home that is their homestead and only for work they do personally, according to Development Services. Otherwise a licensed plumber pulls it. Permit rules in more detail: the City permit report.
| Source | What it says about softeners |
|---|---|
| SAWS Water Quality FAQs | hardness is not a health hazard; no softener advice |
| SAWS troubleshooting table | brown uniform particles may be softener resin; bypass and repair |
| SAWS leak pages | check that a softener works; softener supply line or fill leaks can qualify for adjustment |
| City Home Remodeling FAQ | softener installs need a permit; emergency repair permit within 3 days |
Softeners and leaks
SAWS's meter-reading leak check tells customers to make sure a softener is working properly, and its leak-adjustment list includes a softener supply line or fill mechanism among eligible leak types; see leak adjustments. If a meter shows flow with every fixture off, the meter leak test walks through the steps.
Key facts
- SAWS: hardness 15-20 gpg, "not a health hazard"
- No SAWS page found recommends a softener
- City FAQ: softener installs need a plumbing permit
- Homeowner permits only for one's own homestead and own labor
- Softener resin can show up as uniform brown particles, SAWS says
Sources
- SAWS — Water Quality FAQs: what is hardness (checked Nov. 11, 2026)
- SAWS — troubleshooting table for water quality concerns (checked Nov. 11, 2026)
- San Antonio Development Services — Home Remodeling FAQ (PDF) (checked Nov. 11, 2026)
- San Antonio Development Services — Residential Permits page (checked Nov. 11, 2026)